DUAL ELECTRONICS CORPORATION XD18BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

What is the password for dual xd18bt? ›

The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000". Note: The head unit can be in any mode of operation when pairing is performed. The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

Click Configure to change the settings of the UniFi Cloud Key. 5. Enter the Username and Password (the default login is ubnt/ubnt). Then click Login.

To get audio to multiple speakers, use an app such as AmpMe, Bose Connect, or a few from Ultimate Ears, as well as Bluetooth 5, which send audio to two devices at once. Instructions in this article apply to Bluetooth speakers connected to Android, Amazon Echo, or Google Home devices.

Currently this app controls Dual's Head unit products via Bluetooth. This app controls most of the primary functions of your marine stereo features including: [NOTE : For some models, the Dual iPlug app operates just as a remote controller. ] - Mode change : Radio, USB, Bluetooth, iPod, Aux in.

If your Bluetooth devices won't connect, it's likely because the devices are out of range, or aren't in pairing mode. If you're having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet "forget" the connection.

Most Bluetooth FM transmitters have a display and control buttons. Look for buttons labeled “CH,” “Channel,” or with “+” and “-” symbols. These buttons are used to change the frequency.

If you have problem with a connected Bluetooth device you can reset the Bluetooth module entirely from the Debug menu. This will wipe the Bluetooth configuration, reset the Bluetooth hardware, and disconnect any connected Bluetooth devices.

What is the pairing code for Bluetooth stereo? ›

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.” A passkey may be called “Passcode”, “PIN code”, “PIN number” or “Password.” Make the BLUETOOTH connection from the BLUETOOTH device. When the BLUETOOTH connection is established, the (BLUETOOTH) indicator stays lit.

Simply enter into Pairing Mode while connected to the current two devices, and pair normally to the new device. Once connected to the newly added device, the device that was first paired to your earbuds will be disconnected and you are now paired to two most recently paired devices via Multipoint.

Option 3: Chain-Connected Bluetooth Transmitters

But in this situation, you may replace the sound bar or AVR with another transmitter, resulting in both transmitters functioning at the same time. Each transmitter can connect up to TWO pairs or Bluetooth headphones, so two transmitters can connect up to FOUR pairs…

1. Go to the Settings menu and enter the Wi-Fi menu. 2. Select DualCast-XXXXXX and enter the password 12345678 to connect your iPhone to DualCast™ Dongle via Wi-Fi.

Yes, by default the My book will only have the Admin user, the username and password is admin/admin, you can change the password from the dashboard but if you forget it you can always press the reset button on your My Book to put it back to the default password without deleting any of your files.

The WLAN password for your Tobii Pro Glasses 2 is “TobiiGlasses” with a capital T and G.

The default login username and password are both “admin”. If you have changed the login password, there is no way to find it. You need to reset it to factory default and configure it as a new one.